{"id":333,"date":"2014-10-27T16:58:00","date_gmt":"2014-10-27T21:58:00","guid":{"rendered":"http:\/\/www.hpux.ws\/?p=333"},"modified":"2014-10-27T21:56:38","modified_gmt":"2014-10-28T02:56:38","slug":"efi-boot-configuration-rx7640-san-boot-vpmon-example","status":"publish","type":"post","link":"https:\/\/www.hpux.ws\/?p=333","title":{"rendered":"EFI boot configuration rx7640 san boot vpmon example"},"content":{"rendered":"

EFI boot configuration<\/strong><\/h1>\n

 <\/p>\n

This example uses AUTO file to boot vpmon. This example happens to use HP-UX B.11.23 but the procedure is the same for B.11.31 though the disk paths will look different.<\/p>\n

AUTO<\/p>\n

boot \/stand\/vpmon<\/p>\n

map \u2013r<\/p>\n

The bootable disks show Part1 on the disk list (highlighted<\/strong>). Local disks (which should not be used are SCSI, SAN disks show a WWN(also bold) output is truncated.<\/p>\n

 <\/p>\n

fs0\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,100)\/Pci(3|0)\/Scsi(Pun6,Lun0)\/HD(Part1<\/strong>,Sig80AE9EAE-9DB5-11DE-8000-D6217B60E588)<\/p>\n

fs1\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,100)\/Pci(3|0)\/Scsi(Pun6,Lun0)\/HD(Part3,Sig80AE9F12-9DB5-11DE-8000-D6217B60E588)<\/p>\n

fs2\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,101)\/Pci(1|0)\/Pci(4|1)\/Scsi(Pun6,Lun0)\/HD(Part1<\/strong>,Sig2B540C3C-01A8-11DD-8002-D6217B60E588)<\/p>\n

fs3\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,0)\/Pci(3|0)\/Scsi(Pun6,Lun0)\/HD(Part1,Sig89D238D4-9FB4-11E1-8002-D6217B60E588)<\/p>\n

fs4\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,0)\/Pci(3|0)\/Scsi(Pun6,Lun0)\/HD(Part3,Sig89D23906-9FB4-11E1-8004-D6217B60E588)<\/p>\n

fs5\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,1)\/Pci(1|0)\/Pci(4|1)\/Scsi(Pun5,Lun0)\/HD(Part1,SigBE2E924E-A068-11E1-8002-D6217B60E588)<\/p>\n

fs6\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,1)\/Pci(1|0)\/Pci(4|1)\/Scsi(Pun5,Lun0)\/HD(Part3,SigBE2E928A-A068-11E1-8004-D6217B60E588)<\/p>\n

fs7\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,6)\/Pci(1|0)\/Pci(4|0)\/Fibre(WWN50060E80166F4213<\/strong>,Lun4000000000000000)\/HD(Part1<\/strong>,SigB790304C-43E0-11E3-8002-D6217B60E588)<\/p>\n

fs8\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,6)\/Pci(1|0)\/Pci(4|0)\/Fibre(WWN50060E80166F4213,Lun4000000000000000)\/HD(Part3,SigB7903088-43E0-11E3-8004-D6217B60E588)<\/p>\n

fs9\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,6)\/Pci(1|0)\/Pci(4|0)\/Fibre(WWN50060E80166F4213,Lun4001000000000000)\/HD(Part1,Sig1177FB50-5AD6-11E4-8002-D6217B60E588)<\/p>\n

fsA\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,6)\/Pci(1|0)\/Pci(4|0)\/Fibre(WWN50060E80166F4213,Lun4001000000000000)\/HD(Part3,Sig1177FB82-5AD6-11E4-8004-D6217B60E588)<\/p>\n

fsB\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,E)\/Pci(1|0)\/Pci(4|1)\/Fibre(WWN50060E80166F4273<\/strong>,Lun4000000000000000)\/HD(Part1<\/strong>,SigB790304C-43E0-11E3-8002-D6217B60E588)<\/p>\n

fsC\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,E)\/Pci(1|0)\/Pci(4|1)\/Fibre(WWN50060E80166F4273,Lun4000000000000000)\/HD(Part3,SigB7903088-43E0-11E3-8004-D6217B60E588)<\/p>\n

fsD\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,E)\/Pci(1|0)\/Pci(4|1)\/Fibre(WWN50060E80166F4273,Lun4001000000000000)\/HD(Part1<\/strong>,Sig1177FB50-5AD6-11E4-8002-D6217B60E588)<\/p>\n

fsE\u00a0\u00a0 : Acpi(HWP0002,PNP0A03,E)\/Pci(1|0)\/Pci(4|1)\/Fibre(WWN50060E80166F4273,Lun4001000000000000)\/HD(Part3,Sig1177FB82-5AD6-11E4-8004-D6217B60E588)<\/p>\n

 <\/p>\n

To set a boot disk you need to fs#:<\/p>\n

Then cd \/EFI\/HPUX and run the bcfg command<\/p>\n

In this example, the boot disks for the vpar are fs7: and fsB:<\/p>\n

 <\/p>\n

fs7:<\/p>\n

cd EFI<\/p>\n

cd HPUX<\/p>\n

fs7: \\EFI\\HPUX> bcfg boot add 1 hpux.efi “HPUX primary vpar boot”<\/strong><\/p>\n

fsB: \\EFI\\HPUX>\u00a0 bcfg boot add 2 hpux.efi “HPUX alternate vpar boot”<\/strong><\/p>\n

 <\/p>\n

Boot menu should look like this:<\/p>\n

\u00a0<\/strong><\/p>\n

HPUX primary vpar boot<\/p>\n

HPUX alternate vpar boot<\/p>\n

LAN [Acpi(HWP0002,PNP0A03,101)\/Pci(1|0)\/Pci(6|1)\/Mac(001F296EAD7<\/p>\n

LAN [Acpi(HWP0002,PNP0A03,1)\/Pci(1|0)\/Pci(6|0)\/Mac(001E0B83F25E)<\/p>\n

LAN [Acpi(HWP0002,PNP0A03,1)\/Pci(1|0)\/Pci(6|1)\/Mac(001E0B83F25F)<\/p>\n

EFI Shell [Built-in]<\/p>\n

Internal DVD (Upper) Cabinet 0 [Acpi(HWP0002,PNP0A03,100)\/Pci(3|<\/p>\n

Internal DVD (Lower) Cabinet 0 [Acpi(HWP0002,PNP0A03,0)\/Pci(3|1)<\/p>\n

LAN [Acpi(HWP0002,PNP0A03,101)\/Pci(1|0)\/Pci(6|0)\/Mac(001F296EAD7<\/p>\n

HPUX Vpar<\/p>\n

Boot Option Maintenance Menu<\/p>\n

 <\/p>\n

Recommendation: test both your options.<\/p>\n

 <\/p>\n

AUTO file was edited on the OS as follows:<\/p>\n

\u00a0efi_cp -d \/dev\/rdsk\/c18t0d0s1 -u \/EFI\/HPUX\/AUTO AUTO<\/strong>
\n<edit with vi>
\n\u00a0efi_cp -d \/dev\/rdsk\/c18t0d0s1 AUTO \/EFI\/HPUX\/AUTO<\/strong><\/p>\n

Repeat for both boot disks.<\/p>\n

root@myvpmon0# lvlnboot -v<\/strong>
\nCurrent path “\/dev\/dsk\/c20t0d0s2” is an alternate link, skip.
\nBoot Definitions for Volume Group \/dev\/vg00:
\nPhysical Volumes belonging in Root Volume Group:
\n\/dev\/dsk\/c18t0d0s2 (0\/0\/6\/1\/0\/4\/0.1.128.0.0.0.0) — Boot Disk
\n\/dev\/dsk\/c20t0d0s2 (0\/0\/14\/1\/0\/4\/1.1.140.0.0.0.0)
\nBoot: lvol1\u00a0\u00a0\u00a0\u00a0 on:\u00a0\u00a0\u00a0\u00a0 \/dev\/dsk\/c18t0d0s2
\n\/dev\/dsk\/c20t0d0s2
\nRoot: lvol3\u00a0\u00a0\u00a0\u00a0 on:\u00a0\u00a0\u00a0\u00a0 \/dev\/dsk\/c18t0d0s2
\n\/dev\/dsk\/c20t0d0s2
\nSwap: lvol2\u00a0\u00a0\u00a0\u00a0 on:\u00a0\u00a0\u00a0\u00a0 \/dev\/dsk\/c18t0d0s2
\n\/dev\/dsk\/c20t0d0s2
\nDump: lvol2\u00a0\u00a0\u00a0\u00a0 on:\u00a0\u00a0\u00a0\u00a0 \/dev\/dsk\/c18t0d0s2, 0<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

EFI boot configuration   This example uses AUTO file to boot vpmon. This example happens to use HP-UX B.11.23 but the procedure is the same for B.11.31 though the disk paths will look different. AUTO boot \/stand\/vpmon map \u2013r The bootable disks show Part1 on the disk list (highlighted). Local disks (which should not be […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"_kadence_starter_templates_imported_post":false,"footnotes":""},"categories":[8],"tags":[98,96,99,3,97,92],"class_list":["post-333","post","type-post","status-publish","format-standard","hentry","category-sysadmin","tag-auto-file","tag-efi-configuration","tag-efi_cp","tag-hpux","tag-san-boot","tag-vpmon"],"_links":{"self":[{"href":"https:\/\/www.hpux.ws\/index.php?rest_route=\/wp\/v2\/posts\/333"}],"collection":[{"href":"https:\/\/www.hpux.ws\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hpux.ws\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hpux.ws\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hpux.ws\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=333"}],"version-history":[{"count":2,"href":"https:\/\/www.hpux.ws\/index.php?rest_route=\/wp\/v2\/posts\/333\/revisions"}],"predecessor-version":[{"id":335,"href":"https:\/\/www.hpux.ws\/index.php?rest_route=\/wp\/v2\/posts\/333\/revisions\/335"}],"wp:attachment":[{"href":"https:\/\/www.hpux.ws\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=333"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hpux.ws\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=333"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hpux.ws\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=333"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}