msgbartop
Tips and Tricks site for advanced HP-UX Engineers
msgbarbottom

09 Jun 10 System I/O layout (EMC specific)

This is a script designed to document the layout of a system. It is EMC specific and requires the output of the inq command, which I store in /tmp/inq.txt

It can however be adapted to non EMC disk systems. It correctly shows the port/lba layout and status of network and fiber I/O the way it appears on the outside of the system. Two tables are included to permit lookups of the port/lba information. It has worked on blades, and is certified for rp8420 and superdome systems.

It has only been tested on HP-UX 11.31.

… please stand by….update in progress…

DF=”super.translate.dat”
MA=”router.macadd.dat”

typeset MYDIR=/var/tmp/syslayout
typeset MYPAGE=mypage
typeset MYDATA=mydata
typeset IDX_HTML=syslayout.html

writehtml (){
while [ $# -gt 0 ]
do
echo “<td>${1}</td>” >> ${IDX_HTML}

shift
done
echo “<tr>” >> ${IDX_HTML}
}

cat -<<!EOF > ${IDX_HTML}
<!DOCTYPE HTML PUBLIC “-//W3C//DTD HTML 4.0 Transitional//EN”>
<title>Dana IT Unix System documentation</title>
<BODY>
<TABLE style=”WIDTH: 100%; COLOR: rgb(0,0,0); TEXT-ALIGN: left” cellSpacing=2
cellPadding=2 border=0>
<TBODY>
<TR>
<td width=”200″><img
style=”border-width: 0px; margin: 0px; padding: 0px;” alt=”Dana”
src=”dana_logo.jpg”> </td>
<td style=”font-weight: bold;”><big><big>Dana
IT
Unix:
Documentation</big></big></td>

<TD style=”VERTICAL-ALIGN: top; TEXT-ALIGN: center” colSpan=7><BIG
style=”FONT-FAMILY: helvetica,arial,sans-serif”><BIG>Dana IT system I/O Layout.</BIG></BIG><BR></TD></TR>
!EOF

# colum layout # Path       slot MAC Address    lan  ipaddress      vlan   linkstatus

sysname=$(uname -n)
this_cell=$(vparstatus -p $sysname -v |awk ‘/Boot processor/ {print $4}’ |awk -F’\.’ ‘{print $1}’)

# echo $this_cell

this_par=$(parstatus -c 0 |awk ‘/cell’$this_cell’/ {print $9}’)

nparname=$(/usr/sbin/parstatus -P |awk “/^$this_par/ {if(pname == 1) {print}};/Partition Name/ {pname=1}”|awk ‘/’$this_par’ / {print $6}’)

#echo “Diag nparname: ${nparname}”

complexname=$(/usr/sbin/parstatus -X |awk “/Complex Name/”)
cellind=”cell${this_par}”

nparinfo=$(/usr/sbin/parstatus -P |awk “/^$this_par/ {if(pname == 1) {print}};/Partition Name/ {pname=1}”)
# model needs to be determineed
OS=$(uname -r)
if [ “$OS” = “B.11.31” ]
then
mod=$(model | awk ‘{ print $5 }’)
else
mod=$(model | awk -F/ ‘{ print $3}’)
fi

hn=$(hostname)

this_cell=$(vparstatus -p ${hn} -v |awk ‘/Boot processor/ {print $4}’ |awk -F’\.’ ‘{print $1}’)

echo $this_cell

this_par=$(parstatus -c 0 |awk ‘/cell’$this_cell’/ {print $9}’)

/usr/sbin/parstatus -P |awk “/cell/ {if(pname == 1) {print}};/Partition Name/ {pname=1}”|awk ‘/’$this_par’ / {print $6}’

hn=$(hostname)
lhn=”${hn}.dana.com”
echo “Host name: ${lhn}”
writehtml “Host name:” ${lhn}
echo “Model number is: $mod”
writehtml “Model number:” ${mod}
#echo “<td>$complexname</td><td>$nparname</td><tr>” >>  ${IDX_HTML}
writehtml “${complexname}” ${nparname}
echo “Model number is: $mod”
pbootpath=$(parstatus -p 0 -V |awk -F: ‘/Primary Boot Path/ {print $2}’)

echo “Primary boot path: ${pbootpath}”
writehtml “Primary boot path:” ${pbootpath}
#echo “<td>$complexname</td><td>$nparnam</td><tr>” >>  ${IDX_HTML}
# echo “<td>Path</td><td>slot</td><td>MAC Address</td><td>lan</td><td>IP Address</td><td>vlan</td><td>Link Status</td><tr>” >>  ${IDX_HTML}
writehtml Path slot MAC_Address lan IP_Address vlan Link_Status

#echo “$nparinfo”
# echo “Path        slot MAC         lan     check    ip”
# 2/0/5/1/0/6/1 4 0x002264E4948B lan1 10.8.128.162
echo  “Path       slot MAC Address    lan  ipaddress      vlan   linkstatus”

/usr/sbin/ioscan -fnk | awk ‘/^lan/ {print $3}’ |while read -r path
do
ip=””;
echo $path  | sed ‘s/\// /g’ | read p1 p2 p3 p4 p5 p6 p7
macaddy=$(lanscan | awk ‘{if($1 == “‘${path}'”) print $2}’)
lanid=$(lanscan | awk ‘{if($1 == “‘${path}'”) print $5}’)
plan=$(lanscan | awk ‘{if($1 == “‘${path}'”) print $3}’)
lchk=$(/usr/sbin/linkloop -i $plan $macaddy 2>/dev/null | grep “OK”)
# If linkloop produces postive results then see if there is an ip address
ip=”IP not set”
if [ -n “$lchk” ]
then
# echo “lchk not null. running ifconfig command”
ip=$(/usr/sbin/ifconfig $lanid | grep netmask | awk ‘{print $2}’)
fi
# roll through the router table and see if you can establish
# linkloop with the gateway
DRMAC=”No link..”
DVLAN=”Not found”
#while [[ “$value” != “val1” || “$value” != “val2” || “$value” != “val3” ]]
while read -r DL
do
rmacaddy=$(echo $DL | awk -F: ‘{print $2}’)
rvlan=$(echo $DL | awk -F: ‘{print $3}’)
rlchk=$(/usr/sbin/linkloop -i $plan $rmacaddy 2>/dev/null | grep “OK”)
if [ -n “$rlchk” ]
then
# echo “rlchk not null. setting vlan information.”
DRMAC=${rmacaddy}
DVLAN=${rvlan}
break;
fi
done < $MA

#  echo “${path} ${p7} ${macaddy} ${lanid} ${lchk} ${ip} ”
#p1=$(echo $path | awk -F/ ‘{print $1}’);
#p2=$(echo $path | awk -F/ ‘{print $2}’);
#p3=$(echo $path | awk -F/ ‘{print $3}’);
#p4=$(echo $path | awk -F/ ‘{print $4}’);
#p5=$(echo $path | awk -F/ ‘{print $5}’);
#p6=$(echo $path | awk -F/ ‘{print $6}’);
#p7=$(echo $path | awk -F/ ‘{print $7}’);

portpath=$(echo $path | awk -F/ ‘{print $3}’)
actualport=$(awk -F: ‘{if($2 == “‘${portpath}'” && $3 == “‘$mod'”) print $1}’ ${DF})

# echo “Actual path: ${p1} ${p2} ${p3} ${p4} ${p5} ${p6} ${p7}  ${actualport} ${ip} ${macaddy} ${lanid} ${ip}”
echo “${path} ${actualport} ${macaddy} ${lanid} ${ip}   ${DVLAN}   ${DRMAC}”
# echo “<td>${path}</td><td>${actualport}</td><td>${macaddy}</td><td>${lanid}</td><td>${ip}</td><td>${DVLAN}</td><td>${DRMAC}</td><tr>” >> ${IDX_HTML}
writehtml ${path} ${actualport} ${macaddy} ${lanid} ${ip} ${DVLAN} ${DRMAC}
done

echo “Fiber Channel….”
# echo “<td>Fiber Channel….</td><tr>” >> ${IDX_HTML}
writehtml  “Fiber Channel”
echo “PATH       slot Device… Status spd Hardware address”
# echo “<td>PATH</td><td>slot</td><td>Device</td><td>Status</td><td>speed</td><td>Hardware address</td><tr>” >>  ${IDX_HTML}
writehtml PATH slot Device Status speed Hardware address
#/usr/sbin/ioscan -fnCfc | grep fcd | awk ‘{print $3}’ |while read -r path
/usr/sbin/ioscan -fnk | awk ‘/^fc / {hw=$3;getline;print hw,$1}’ |while read -r hw devfile
do
#   echo “diag ${hw} dev file … ${devfile}”
port=$(echo $hw | awk -F/ ‘{print $3}’)
OSTAT=$(fcmsutil $devfile | awk ‘/ONLINE/  {print $4}’)
LSPD=$(fcmsutil $devfile | awk ‘/Link Speed/  {print $4}’)
WWN=$(fcmsutil $devfile | awk ‘/N_Port Port World Wide Name/  {print $7}’)
#  OSTAT=$(fcmsutil /dev/fcd1 | awk ‘/ONLINE/  {print $4}’)
#  LSPD=$(fcmsutil /dev/fcd1 | awk ‘/Link Speed/  {print $4}’)
#  WWN=$(fcmsutil /dev/fcd1 | awk ‘/N_Port Port World Wide Name/  {print $7}’)
actualport=$(awk -F: ‘{if($2 == “‘${port}'” && $3 == “‘$mod'”) print $1}’ ${DF})
echo “$hw ${actualport} $devfile ${OSTAT} ${LSPD} ${WWN}”
#echo “<td>$hw</td><td>${actualport}</td> <td>$devfile</td><td>${OSTAT}</td><td>${LSPD}</td> <td>${WWN}</td><tr>” >>  ${IDX_HTML}
writehtml ${hw} ${actualport} ${devfile} ${OSTAT} ${LSPD} ${WWN}
done

#awk -F: ‘{printf(“%8s %5s %4s\n”,$1,$3,$4)}’ steve
#2/0/5/1/0/6/0
#2/0/5/1/0/6/1

cat -<< !EOF >> ${IDX_HTML}
<TR></TR></TBODY></TABLE></BODY></HTML>
!EOF

chmod a+r ${IDX_HTML}
# Added to copy the data file to my home directory for diagnosis.
cp syslayout.html /home/sprotte
chmod a+r /home/sprotte/syslayout.html

super.translate.dat
—–
root@gitop2:/root # more /usr/global/etc/super.translate.dat
11:8:SD64B
10:9:SD64B
9:10:SD64B
8:12:SD64B
7:13:SD64B
6:14:SD64B
5:6:SD64B
4:5:SD64B
3:4:SD64B
2:2:SD64B
1:1:SD64B
0:0:SD64B
1:8:rp8420
2:10:rp8420
3:12:rp8420
4:14:rp8420
5:6:rp8420
6:4:rp8420
7:2:rp8420
8:1:rp8420

more /usr/global/etc/router.macadd.dat
Format:

IP Address : MAC Address : vlan# : Description
:0x00000c07ac0a:vlan9:HP-UX Production

Obviously this data varies from place the place. The Mac address of the router is used to check network connectivity with the linkloop command

Tags: , , , , ,

Reader's Comments

  1. |

    Sorry. All the indentation was stripped out by wordpress.

    I will attempt to upload the script to retain formatting.

  2. |

    May have found a bug or bad data in the table during a QA test. Stand by for update. Also we are beginning to use APA and it might be better to modify this utility to parse output from the nwmgr command. See the man page or APA doc for what it does.

Leave a Comment

You must be logged in to post a comment.

Supportscreen tag
WhatsApp chat